Water Rocket Lab · Guide · glidepathscience.org
GuideWater Rocket Lab
Contents
This Guide explains the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round. Part 1 prepares the Intro track and Part 2 the Advanced track; each takes about twelve minutes. The worked examples use a smaller rocket than the sim’s class rocket: a 1.5 L bottle, 9.0 cm across, with the same 22 mm neck as its nozzle, 120 g empty, filled 30 % (0.45 L) and pumped to 320 kPa.
Part 1 · The essentials
Math you’ll need: algebra, square roots and powers; an optional box uses an integral.
Three phases, and what pushes the rocket
A water rocket is a plastic bottle, partly filled with water, turned upside down on a launcher and pumped full of air until the pressure inside is a few times the outside air’s. When it is let go, the flight has three parts. First the compressed air drives the water out through the open neck, in about a tenth of a second: the water phase. Then, with the water gone, the leftover air rushes out in a short air pulse. Then the empty rocket coasts up, slowed by gravity and air resistance, stops at its highest point (the apogee) and falls back.
What pushes the rocket up is the water. The bottle and its air push the water out of the nozzle, downward; by Newton’s third law the water pushes back on the bottle, upward, with a force just as large. The jet does not need anything to push against. It does not push on the ground or the air below, and a rocket works in empty space just as well. The push is between the rocket and what it throws away, and it lasts only as long as something is being thrown.
The exit speed, and thrust as momentum flow
How fast does the water leave? Inside the bottle the air presses on the water with a pressure $Δp$ above the outside air’s; that difference, the gauge pressure, is what a pump’s gauge reads. Bernoulli’s equation says that a pressure difference becomes kinetic energy per unit volume, $\tfrac{1}{2}ρu^2$, where $ρ$ = 1000 kg/m³ is the water’s density. So the jet’s speed is
$u = \sqrt{2Δp/ρ}$
Only the gauge pressure counts, because the outside air presses back on the jet. Notice the square root: four times the pressure gives only twice the speed.
Each second, the jet carries away a mass of water equal to its density times the volume that passes through the nozzle’s area $A_n$:
$Δm/Δt = ρA_nu$
all of it moving at $u$. The momentum it carries off each second is $(Δm/Δt)u$, and momentum carried off per second is exactly the force between the rocket and its jet, the thrust:
$F = (Δm/Δt)u = 2Δp\,A_n$
The second form comes from putting $u^2 = 2Δp/ρ$ into $ρA_nu^2$. It holds a surprise. A first guess for the push would be the pressure times the area of the hole, $Δp\,A_n$, and the thrust is twice that. In a capped bottle the cap’s push up and the shoulders’ push down leave exactly $Δp\,A_n$. With the water flowing, the water speeding toward the nozzle presses less on the shoulders around it (that is Bernoulli again), so they are pushed down less, and the net force doubles.
The air is the engine
The water is only what the rocket throws; the energy comes from the compressed air. As the water leaves, the air takes its place and expands, and its pressure falls, so the jet slows and the thrust falls with it. The expansion is quick, a tenth of a second, with no time for heat to flow in from the walls, so the air follows the adiabatic law
$p_b = p_0(V_0/V)^{1.4}$
where $p_0$ and $V_0$ are the air’s starting pressure and volume, $V$ its volume later (the whole bottle, once the water is gone), and 1.4 is air’s ratio of heat capacities. Gas laws need absolute pressure: add the outside air’s 101.3 kPa to the gauge reading first, and subtract it again at the end. A slow, constant-temperature expansion would follow Boyle’s $pV$ = constant instead; the fast one loses pressure faster, because the air cools as it does work.
Impulse, and a rocket that gets lighter
A thrust that changes from instant to instant is best summed up by its impulse, the area under the thrust-against-time curve. The impulse is what decides how much momentum the rocket can gain. An average thrust held for the same time gives the same area:
$J = F_{avg}\,Δt$
The average of the starting and ending thrusts overestimates $F_{avg}$, because the thrust curve sags below a straight line between them as the pressure falls.
While the thrust falls, the rocket’s mass falls faster: most of the launch mass is water, and the water is what leaves. Newton’s second law with gravity gives the acceleration straight up, ignoring drag, as
$a = F/m − g$
so the acceleration is largest just before the water runs out, even though the thrust is then at its weakest.
The best fill
How much water should go in? With no water at all, the air alone has almost no mass to throw: its short pulse barely lifts the bottle. With the bottle nearly full there is almost no air: it expands to the outside pressure with most of the water still inside, the jet stops, and the rocket carries the rest as dead weight. In between, more water means more mass to throw and less air to throw it with, and the apogee has a maximum. For the class rocket at 400 kPa it is near 30 %; the folk rule “a third full” is close.
Near the peak the curve is flat, so a fill a few percent off costs little. At low pressure the peak moves to less water: at 200 kPa the class rocket’s best fill is 27.7 %, reaching 24.0 m.
Mass matters in a second way. Without air, a lighter rocket always flies higher. With air, the drag on a rocket depends on its speed and shape, not its mass, so the same drag slows a light rocket more. Trim a rocket too far and it shoots off faster but loses its speed quickly: with drag there is a best dry mass too, and for the class rocket it lies near 115 g.
The coast, and drag
When the thrust ends, only gravity and air resistance act. Without air, the rocket’s kinetic energy turns into potential energy, $\tfrac{1}{2}mv^2 = mgh$, and it climbs
$h = v^2/2g$
more. With air it climbs much less, because at these speeds drag is bigger than the rocket’s weight. Drag grows with the square of the speed, $D = \tfrac{1}{2}ρ_{air}C_dAv^2$, where $ρ_{air}$ is the air’s density, $A$ the rocket’s cross-section and $C_d$ the drag coefficient, a number set by the rocket’s shape.
A model, and a launch
Everything this sim predicts comes from a model: equations for the thrust, the air and the drag, with numbers put in for the bottle, the nozzle, the mass and $C_d$. When a real launch disagrees, the first suspect is the input known least well. The bottle’s volume is printed on it and $g$ is known to a fraction of a percent; $C_d$ was estimated from typical rockets, and since drag about halves the climb, an error in it moves the apogee a lot. Engineers measure, compare and adjust: the Launch Log lets you launch the class’s real rocket (a simulated one, its $C_d$ hidden) and set the model’s $C_d$ until it matches.
Part 2 · Going further
Math you’ll need: Part 1, derivatives and integrals, a logarithm, and one differential equation solved by separating variables.
The rocket equation
A body that throws mass away needs Newton’s second law written with care. Over a short time $dt$ the rocket of mass $m$ throws out a mass $\dot{m}\,dt$ at speed $u$ relative to itself; momentum conservation for the rocket and the thrown mass together gives, for a vertical flight,
$m\,dv/dt = \dot{m} u − mg − D$
with $\dot{m}$ the positive rate at which mass leaves. The sign is the classic trap: written with the rocket’s own mass, the thrust is $−u\,dm/dt$, positive because $dm/dt$ is negative. At release $v$ = 0, so there is no drag, and the 1.5 L rocket’s 413 m/s² follows directly.
In this model the thrust $2A_nΔp$ depends on the pressure, and the pressure only on the air’s volume. So the state the engine integrates (height, speed and air volume, by fourth-order Runge–Kutta) splits neatly: the burn runs the same on a test stand as in flight, and a static test measures the flight’s thrust.
With no gravity, no drag and a constant exhaust speed, $m\,dv = −u\,dm$ separates and integrates to Tsiolkovsky’s ideal rocket equation,
$Δv = u\ln(m_0/m_f)$
For the 1.5 L rocket with the starting $u$ = 25.3 m/s it promises 25.3 × ln(575/125) = 38.6 m/s; the engine’s rocket has 30.1 m/s when the water runs out. The water rocket’s jet slows as the air expands, and gravity and drag take their share.
The gas: cooling, work and the air pulse
In an adiabatic expansion both $pV^γ$ and $TV^{γ−1}$ stay fixed, so the air’s temperature when the water is gone is
$T_b = T_0(V_0/V)^{γ−1}$
If the 1.5 L bottle were half full, air at 293.15 K would end at $293.15 × 0.5^{0.4}$ = 222.2 K, about −51 °C. Real bottles fill with fog at burnout as water vapor condenses, though heat from the water and the walls keeps the real air somewhat warmer than this. An isothermal model, air held at its starting temperature, keeps more pressure and gives the 1.5 L rocket 43.2 m instead of 38.5 m: the truth lies between, nearer the adiabatic end for so fast a burn.
The energy the jet carries off is the air’s work, less the work of pushing the outside air out of the way:
$W = (p_0V_0 − p_bV)/(γ − 1) − p_{atm}(V − V_0)$
For the 1.5 L rocket $W$ = 101.5 J. On a stand all of it becomes the jet’s kinetic energy; in flight the rocket keeps 56.9 J of it when the water runs out, and the rest leaves with the water.
When the water is gone the air is still above the outside pressure, and it vents through the nozzle. While the pressure inside is more than $((γ + 1)/2)^{γ/(γ−1)}$ = 1.89 times the outside’s, the flow is choked: the air leaves at the speed of sound and the flow rate is set by the inside pressure alone, with an extra pressure thrust $(p_e − p_{atm})A_n$ at the exit. Below that it is subsonic, until the inside reaches the outside pressure. The gas left inside expands adiabatically, so the mass that stays is
$m_{left} = m_a(p_{atm}/p_b)^{1/γ}$
The 1.5 L rocket loses 2.54 g of its 5.26 g of air this way. The pulse’s impulse is small, 0.61 N·s against the water’s 9.50, but it pushes a 125 g rocket instead of a 575 g one: without it the apogee would be 31.7 m, not 38.5 m.
The nozzle, and what the model leaves out
The volume flow is $dV/dt = A_nu$ and $u$ depends only on the pressure, so for the same fill and pressure the burn time goes as $1/A_n$:
$t_2 = t_1(d_1/d_2)^2$
A 15 mm nozzle stretches the 1.5 L rocket’s 56.7 ms burn to 56.7 × (22/15)² = 122 ms. The impulse stays the same, $J = ∫ρu\,dV$, but a long, weak burn spends longer fighting gravity, so the apogee falls a little.
This model takes the jet’s speed from the air pressure alone. In the accelerating bottle the water also feels $g + a$, and the column of depth $h$ above the nozzle adds $ρ(g + a)h$ to the pressure driving the jet. For the 1.5 L rocket at release, with $h$ = 7.1 cm (a cylinder as wide as the body), that is 1000 × 423 × 0.071 = 29.9 kPa, 9 % of $Δp$, shrinking as the column drains. Leaving it out makes the model’s early thrust a few percent low; the free surface’s own speed, $(A_n/A_b)^2$ of the jet’s, matters far less.
Terminal speed, the coast with drag, and fitting the drag coefficient
Falling, a rocket speeds up until drag equals its weight, at its terminal speed
$v_t = \sqrt{2mg/(ρC_dA)}$
Going up, gravity and drag both slow it: $v\,dv/dh = −g(1 + v^2/v_t^2)$, which separates and integrates to the climb from speed $v$,
$h = (v_t^2/2g)\ln(1 + v^2/v_t^2)$
For the empty 1.5 L rocket (123 g, 9.0 cm across, $C_d$ = 0.40) $v_t$ = 28.1 m/s, and from 34.5 m/s it climbs (28.1²/19.62) ln(1 + 34.5²/28.1²) = 37.0 m. At low speeds the formula reduces to $v^2/2g$; at high speeds it grows only as a logarithm, which is why pumping harder pays off less and less.
Because the climb depends so strongly on $C_d$, a measured apogee can be turned into a fitted $C_d$: the value that makes the model match. If the 1.5 L rocket reached 32.0 m instead of 38.5 m, the model would need $C_d$ = 0.64. A fitted parameter soaks up everything else the model leaves out (the water column’s head, losses at the nozzle, a wobbly flight), so it is a test of the model, too: launches at different settings should all agree on one $C_d$ if the rest of the model is right.
Sensitivity and design
The best fill is not a fixed fraction. Weak air can usefully throw only a little water, so at 100 kPa the class rocket’s best fill is about a quarter; by 300 kPa it reaches about 30 %, and above that it barely moves. An engineer also asks which inputs matter most, by changing each a little and watching the answer. For the class rocket a 10 % change in the pressure moves the apogee about 8 %, in $C_d$ about 4 %, in the dry mass about 2 %, and in the fill, which sits near its best, about 1 %. That ranking says where to spend effort: measure the pressure well, and pin down $C_d$.
A design problem runs the model backward. To reach 30 m with the 1.5 L rocket at its best fill, the least pressure is 249 kPa. A designer would then add a margin for the uncertain $C_d$, and stay well under the bottle’s and the launcher’s limits.
Reference
Common mistakes
Part 1
- Thinking the jet pushes on the ground or the air: the rocket pushes the water, and the water pushes back.
- Using absolute pressure in $u = \sqrt{2Δp/ρ}$, or gauge pressure in the gas law. The jet needs the gauge pressure; $pV^{1.4}$ needs absolute.
- Taking the thrust as $Δp\,A_n$: it is twice that.
- Averaging the starting and ending thrusts for $F_{avg}$: the curve sags, so use $J/Δt$.
- Using the starting mass late in the burn: the water that left took its mass with it.
- Thinking more water always means more thrust, or a lighter rocket always flies higher.
Part 2
- Writing the thrust as $+u\,dm/dt$: with the rocket’s own mass it is $−u\,dm/dt$.
- Scaling the burn time with the nozzle’s diameter instead of its area.
- Using $\log_{10}$ where the rocket and coast equations need $\ln$.
- Leaving out the outside air’s share, $p_{atm}(V − V_0)$, in the expansion work.
The equation sheet
| Part 1 | |
|---|---|
| exit speed | $u = \sqrt{2Δp/ρ}$ |
| mass flow | $Δm/Δt = ρA_nu$ |
| thrust | $F = (Δm/Δt)u = 2Δp\,A_n$ |
| the air | $p_b = p_0(V_0/V)^{1.4}$ |
| impulse | $J = F_{avg}\,Δt$ |
| acceleration | $a = F/m − g$ |
| coast, no drag | $h = v^2/2g$ |
| Part 2 | |
|---|---|
| rocket equation | $m\,dv/dt = \dot{m} u − mg − D$ |
| cooling air | $T_b = T_0(V_0/V)^{γ−1}$ |
| burn time | $t_2 = t_1(d_1/d_2)^2$ |
| expansion work | $W = (p_0V_0 − p_bV)/(γ − 1) − p_{atm}(V − V_0)$ |
| air left | $m_{left} = m_a(p_{atm}/p_b)^{1/γ}$ |
| terminal speed | $v_t = \sqrt{2mg/(ρC_dA)}$ |
| coast with drag | $h = (v_t^2/2g)\ln(1 + v^2/v_t^2)$ |
| Tsiolkovsky | $Δv = u\ln(m_0/m_f)$ |
$u$ jet speed, $Δp$ gauge pressure, $ρ$ water’s density (1000 kg/m³; in $v_t$, the air’s, 1.20 kg/m³), $A_n$ nozzle area, $d$ its diameter, $Δm/Δt$ (in Part 2, $\dot{m}$) mass flow, $F$ thrust, $p_0$, $V_0$ the air’s starting (absolute) pressure and volume, $p_b$ its pressure when the water is gone, $V$ the bottle’s volume, $γ$ = 1.4, $J$ impulse, $m$ mass, $g$ = 9.81 m/s², $v$ speed, $h$ height gained, $T$ absolute temperature, $W$ work, $p_{atm}$ = 101.3 kPa, $m_a$ the air’s mass, $C_d$ drag coefficient, $A$ the body’s cross-section, $D$ drag, $m_0$, $m_f$ starting and final mass.
Further reading
- OpenStax, University Physics Volume 1 (W. Moebs, S. J. Ling and J. Sanny), Chapter 9 “Linear Momentum and Collisions”, §9.7 “Rocket Propulsion”, and Chapter 14 “Fluid Mechanics”, §14.6 “Bernoulli’s Equation”; CC BY-NC-SA 4.0, openstax.org.
- This sim’s Field Manual (H): the model, its typical values, what it leaves out, and a safety note for anyone building a real rocket.
Water Rocket Lab v1.0 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org