Sound & Resonance Tubes

v = √(γRT/M) · open and closed tubes · decibels

the speed of sound · resonance tubes · decibels

Close one end of a pipe:
its note drops an octave.

An open pipe resonates when its length holds a whole number of half wavelengths. Close one end and it holds a quarter wave instead: half the frequency, and only the odd harmonics, which is why a clarinet plays about an octave below a flute of nearly the same length. The speed of sound sets every one of these notes, and the gas sets the speed, not the pressure: 343 m/s in 20 °C air, almost three times that in helium, 267 m/s in carbon dioxide, and a little faster on a hot day. Find the resonances, measure the speed, predict it from the gas, then measure how loud: decibels, and the ear’s own resonance near 3 kHz.

Live: a 512 Hz fork over a water column.

The gas sets the speed$v = \sqrt{\gamma RT/M}$, from the temperature and the molar mass, not the pressure: 343 m/s in 20 °C air, 1,007 m/s in helium, 267 m/s in CO₂.
Closed and open tubesA closed tube resonates at $L + \delta = \lambda/4, 3\lambda/4, \ldots$ (odd harmonics only), an open one at half wavelengths (all harmonics). The antinode sits just past an open end, so measure the spacing, $\lambda/2$.
Pressure and displacementA closed end is a displacement node and a pressure antinode; an open end is the reverse.
Decibels and the ear$\beta = (10\text{ dB})\log(I/I_0)$: ten times the intensity adds 10 dB, twice adds 3 dB. The ear hears from 20 Hz to 20 kHz, best near 3 kHz, where its own canal resonates.
Stay in touch