Reaction Rates & Arrhenius · Guide · glidepathscience.org
GuideReaction Rates & Arrhenius
Contents
This Guide explains the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round. Part 1 prepares the Intro track and Part 2 the Advanced track. Each section has a worked example that is not one of the sim’s own problems.
Part 1 · The essentials
Math you’ll need: algebra, powers of ten, the exponential $e^x$ and the natural logarithm $\ln x$ (its inverse), and the slope of a straight line; one optional box uses a derivative.
What a rate is
Chemistry asks two questions about a reaction: how far it goes, and how fast. This sim is about the second. For a reaction A + B → C, the rate is how quickly the concentration of a reactant falls, or a product rises:
rate $= −Δ[\mathrm{A}]/Δt$
The square brackets mean concentration in moles per liter (M), and the minus sign makes the rate positive, since [A] falls. A rate therefore has units of mol·L⁻¹·s⁻¹ (M/s). Because reactants are used up as a reaction goes, most rates slow down over time: a graph of [A] against $t$ is steep at first and then flattens. The average rate over an interval is the slope of the straight line (the secant) joining its two ends; the initial rate is the slope right at the start, before anything has run down.
Why do rates differ so much from one reaction to another, and why do they change with concentration and temperature? The answer is in how molecules meet.
Collisions, energy and orientation
Molecules react only when they touch. In a gas at room conditions each molecule collides billions of times a second, yet most reactions take seconds or hours, so almost all collisions must fail. Collision theory names two reasons.
First, energy. Breaking old bonds and making new ones means passing through a high-energy arrangement, the transition state. The minimum energy needed to reach it is the activation energy $E_a$, in kJ/mol. What counts is the energy of the head-on part of the motion, along the line joining the two centers: two fast molecules that only graze each other carry little energy along that line and simply bounce. Second, orientation. Reactions happen at particular atoms, so the molecules must meet the right way round. The share of energetic collisions that are oriented well enough is the steric factor $p$, a number between 0 and 1.
A collision that fails leaves both molecules unchanged; there is no “partway” reaction. That makes rates a matter of counting: how many collisions happen, and what share succeed.
Concentration and the rate law
Double the number of A molecules in a box and each B meets an A twice as often, so A–B collisions, and the rate of a single-step reaction A + B → C, double. In general the rate depends on concentrations through a rate law:
rate $= k[\mathrm{A}]^m[\mathrm{B}]^n$
The powers $m$ and $n$ are the orders in A and B, and $m + n$ is the overall order; $k$ is the rate constant, which depends on temperature but not on concentration. The orders must be found by experiment. The usual way is the method of initial rates: run the reaction several times, changing one starting concentration at a time, and compare the initial rates. If doubling [A] multiplies the rate by 4, then $2^m$ = 4 and $m$ = 2; if it changes nothing, $m$ = 0. A common mistake is to read the orders off the balanced equation: that works only for a single elementary step, and the sim’s Reaction 2, written A + B → C, is second order in A.
Once the orders are known, any one run gives $k$ = rate/([A]$^m$[B]$^n$). Its units depend on the overall order, so that the rate comes out in M/s: s⁻¹ for first order, L·mol⁻¹·s⁻¹ for second, L²·mol⁻²·s⁻¹ for third.
Temperature and the share above Eₐ
Warming a mixture makes its molecules move faster, so they collide more often, but only a little more: the collision rate grows as $\sqrt{T}$, about 2 % for a 10 K rise near room temperature. Yet many reactions double their rate over those 10 K. The reason is the share of collisions with energy to spare. Molecular energies follow the Boltzmann distribution: most molecules have energies near the average, of order $RT$ (2.5 kJ/mol at room temperature), and a thin tail has much more. The share of collisions with at least $E_a$ along the line of centers is
$f = e^{−E_a/RT}$
with $E_a$ in J/mol and $R$ = 8.314 J·mol⁻¹·K⁻¹. Because $E_a$ is usually many times $RT$, $f$ is tiny and very sensitive to $T$: the tail grows far faster than the average energy. Note that $E_a$ itself does not change with temperature; what changes is how many molecules can climb it.
The rule of thumb “twice as fast for 10 K” holds only near $E_a$ ≈ 50 kJ/mol at room temperature; a higher barrier more than doubles, a lower one less.
The Arrhenius equation and its plot
Putting the collisions and the energy share together gives the Arrhenius equation for the rate constant:
$k = Ae^{−E_a/RT}$
The pre-exponential factor $A$ collects how often molecules collide and the steric factor; it has the same units as $k$. Taking the natural logarithm of both sides turns the exponential into a straight line:
$\ln k = \ln A − \dfrac{E_a}{R}\cdot\dfrac{1}{T}$
So a plot of $\ln k$ against $1/T$, the Arrhenius plot, is straight, with slope $−E_a/R$ and intercept $\ln A$. To find $E_a$, measure $k$ at several temperatures, fit the best straight line, and use $E_a = −R × \text{slope}$. The slope is negative and $E_a$ positive; a steeper line means a larger $E_a$ and a reaction more sensitive to temperature. With only two runs, the slope through the two points gives
$\ln(k_2/k_1) = (E_a/R)(1/T_1 − 1/T_2)$
Catalysts and the energy diagram
An energy diagram draws the energy of the reacting molecules along the reaction coordinate, the path from reactants to products. The reactants start at one level, the curve climbs to the transition state, $E_a$ above the start, and falls to the products, $ΔH$ above or below the start (below for an exothermic reaction). The reverse reaction climbs the same hill from the other side, so its barrier is $E_a − ΔH$.
A catalyst provides a different path with a lower barrier, often through an intermediate, and comes out unchanged at the end. It does not change where the path starts or ends: the reactants, the products and $ΔH$ stay the same, and the reverse reaction speeds up by the same factor, so the equilibrium does not move. With the same $A$, the speed-up is
$k_{cat}/k = e^{ΔE_a/RT}$
Part 2 · Going further
Math you’ll need: exponentials and logarithms, first-order differential equations and their solutions, square roots of kinetic-theory expressions, and a least-squares line with the standard error of its slope.
Integrated rate laws and half-lives
Initial rates find the orders; a single long run can confirm them. A rate law is a differential equation, $−d[\mathrm{A}]/dt = k[\mathrm{A}]^m$ for one reactant, and integrating it gives [A] as a function of time. Each order has a form that plots as a straight line:
| order | integrated law | straight plot | half-life |
|---|---|---|---|
| zeroth | $[\mathrm{A}] = [\mathrm{A}]_0 − kt$ | [A] against $t$ | $[\mathrm{A}]_0/2k$ |
| first | $\ln[\mathrm{A}] = \ln[\mathrm{A}]_0 − kt$ | ln[A] against $t$ | $\ln 2/k$ |
| second | $1/[\mathrm{A}] = 1/[\mathrm{A}]_0 + kt$ | 1/[A] against $t$ | $1/(k[\mathrm{A}]_0)$ |
Only the first-order half-life is independent of the starting concentration: every half takes the same time. A reaction with two reactants, rate $= k[\mathrm{A}][\mathrm{B}]$, can be made to look first order by flooding it with B: if $[\mathrm{B}]_0$ is a hundred times $[\mathrm{A}]_0$, [B] barely changes, and rate ≈ $k′[\mathrm{A}]$ with
$k′ = k[\mathrm{B}]_0$
This pseudo-first-order trick isolates one reactant’s order at a time, and the half-life of A is then $t_{1/2} = \ln 2/k$ with $k′$ in place of $k$.
Collision theory, quantitatively
Kinetic theory counts collisions. Treat A and B as hard spheres whose centers touch at a distance $d$; a B within $d$ of A’s path is hit, so the cross section is $σ = πd^2$. Relative motion uses the reduced mass $μ = m_Am_B/(m_A + m_B)$, and the mean relative speed in a gas at $T$ is
$⟨v_{rel}⟩ = \sqrt{8k_BT/πμ}$
Collisions per unit volume per second are $Z_{AB} = σ⟨v_{rel}⟩n_An_B$, with $n$ in molecules per m³. Weighting collisions by their relative speed and integrating over impact parameters shows that the share with energy along the line of centers of at least $E_a$ is exactly $e^{−E_a/RT}$, in 3-D and in the sim’s 2-D box alike. With the steric factor, per mole:
$k = pσ⟨v_{rel}⟩N_Ae^{−E_a/RT}$
(times 1,000 L/m³ for L·mol⁻¹·s⁻¹). Comparing a measured $k$ with this value for $p$ = 1 estimates $p$; values far below 1 point to strict orientation demands. Because $⟨v_{rel}⟩ ∝ \sqrt{T}$, the collision-theory $A$ grows with temperature, and an Arrhenius fit of such $k$ reports an apparent $E_a$ about $RT/2$ too high, about 1.5 kJ/mol near 350 K, which a straight-looking plot hides.
How well is Eₐ known?
Measured rate constants scatter, so a fitted slope has an uncertainty. A least-squares line through $\ln k$ against $1/T$ gives the slope and its standard error from the scatter of the points, and $E_a$ inherits it: $σ(E_a) = R\,σ(\text{slope})$. The error shrinks with more runs only slowly, as $1/\sqrt{n}$, but in proportion to the spread of $1/T$: widening the temperature range is the best single improvement. With five points the fit has three degrees of freedom, so its standard error is itself rough; report $E_a$ to two significant figures in the error.
Transition-state theory and the Eyring plot
Transition-state theory treats the activated complex ‡ at the top of the barrier as a species in quasi-equilibrium with the reactants, crossing over at a universal frequency $k_BT/h$. It gives the Eyring equation, here per 1 M standard state:
$k = \dfrac{k_BT}{h}\,e^{ΔS^‡/R}\,e^{−ΔH^‡/RT}$
$ΔH^‡$ is the enthalpy of activation and $ΔS^‡$ the entropy of activation. When two molecules join into one tightly arranged complex, they lose freedom of motion, so $ΔS^‡$ is negative and the reaction is slower than $k_BT/h$ would suggest: $ΔS^‡$ plays the part the steric factor plays in collision theory. Dividing by $T$ and taking logs gives the Eyring plot, $\ln(k/T)$ against $1/T$, with slope $−ΔH^‡/R$ and intercept $\ln(k_B/h) + ΔS^‡/R$. Comparing it with the Arrhenius form shows that for a reaction in solution
$ΔH^‡ = E_a − RT$
Catalysis and mechanisms
A catalyst’s speed-up is exponential in the barrier it removes, which is why enzymes, lowering barriers by tens of kJ/mol, speed reactions by factors of a billion or more. Because forward and reverse share the path, both directions speed up by the same factor and the equilibrium constant is unchanged.
Most reactions happen in several elementary steps, the mechanism. Each elementary step’s rate law follows its own molecularity (B + B → B₂ has rate $= k[\mathrm{B}]^2$), but the overall rate law does not follow the overall equation. When one step is much slower than the rest, it is the rate-determining step: the steps after it wait for it, so the overall rate law is the slow step’s, written in terms of reactants (an intermediate such as A₂ never appears in a final rate law). When no single step is slowest, the steady-state approximation, setting the rate of change of each intermediate to zero, gives the rate law.
What the model leaves out
The sim’s box is a 2-D gas of hard disks with barriers of 0–30 kJ/mol, low enough to watch reactions happen; most reactions in a lab have barriers of roughly 40–150 kJ/mol, where only one collision in millions or more succeeds. The box’s reaction is one irreversible step, its products are inert, and a thermostat removes the heat of reaction. Real reactions also show diffusion control in solution (the reactants cannot meet faster than they diffuse), solvent cages, and tunneling through the barrier, important for hydrogen transfer at low temperature. None of these is modeled.
Reference
Common mistakes
Part 1
- Reading the orders off the balanced equation instead of from experiment.
- Leaving $E_a$ in kJ/mol while $R$ is in J·mol⁻¹·K⁻¹ (or the reverse): $e^{−E_a/RT}$ then comes out near 1.
- Thinking warming speeds reactions mainly by more frequent collisions; it is the larger share above $E_a$.
- Thinking $E_a$ changes with temperature, or that a catalyst changes $ΔH$ or is used up.
- Forgetting the minus sign: $E_a = −R ×$ slope, and the slope is negative.
Part 2
- Using a first-order half-life for a second-order reaction (or $1/k$ for $\ln 2/k$).
- Using one molecule’s mass instead of the reduced mass in $⟨v_{rel}⟩$.
- Calling an Eyring slope $E_a$: it gives $ΔH^‡$, about $RT$ smaller.
- Writing an intermediate into a rate law.
The equation sheet
| Part 1 | |
|---|---|
| rate | rate $= −Δ[\mathrm{A}]/Δt$ |
| rate law | rate $= k[\mathrm{A}]^m[\mathrm{B}]^n$ |
| share above $E_a$ | $f = e^{−E_a/RT}$ |
| Arrhenius | $k = Ae^{−E_a/RT}$ |
| two temperatures | $\ln(k_2/k_1) = (E_a/R)(1/T_1 − 1/T_2)$ |
| from the plot | $E_a = −R × \text{slope}$ |
| catalyst | $k_{cat}/k = e^{ΔE_a/RT}$ |
| Part 2 | |
|---|---|
| first order | $t_{1/2} = \ln 2/k$ |
| second order | $1/[\mathrm{A}] = 1/[\mathrm{A}]_0 + kt$ |
| pseudo-first order | $k′ = k[\mathrm{B}]_0$ |
| relative speed | $⟨v_{rel}⟩ = \sqrt{8k_BT/πμ}$ |
| collision theory | $k = pσ⟨v_{rel}⟩N_Ae^{−E_a/RT}$ |
| Eyring | $ΔH^‡ = E_a − RT$ |
Symbols: [A] concentration (mol/L); $k$ rate constant; $m$, $n$ orders; $E_a$ activation energy (J/mol in formulas); $R$ = 8.314 J·mol⁻¹·K⁻¹; $T$ temperature (K); $A$ pre-exponential factor; $p$ steric factor; $σ = πd^2$ cross section; $μ$ reduced mass; $k_B$ = 1.381 × 10⁻²³ J/K; $h$ = 6.626 × 10⁻³⁴ J·s; $N_A$ = 6.022 × 10²³ mol⁻¹.
Sources and further reading
OpenStax, Chemistry 2e, Chapter 12, “Kinetics” (§12.1–12.7), CC BY-NC-SA 4.0, which the Intro track follows in its order and notation. The Field Manual describes the sim’s model and what it leaves out.
Reaction Rates & Arrhenius v1.0 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org