Parallel Plates & Uniform Fields · Guide · glidepathscience.org
GuideParallel Plates & Uniform Fields
Contents
This Guide covers the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round. Read Part 1 before the Intro track and Part 2 before the Advanced track, about ten minutes each. Come back whenever a question sends you here.
Part 1 · The essentials
The big idea
Charge two large flat plates, + and −, and the field between them is the simplest there is: the same everywhere in the gap. A charge there feels a constant force, as a ball feels its weight. Everything in this lab follows: energy that depends only on height across the gap, beams that bend like thrown balls, and oil drops held still against gravity.
The uniform field
Between two large plates a distance $d$ apart, with a potential difference $\Delta V$ between them, the field’s strength is
$E = |\Delta V|/d$
everywhere in the gap, pointing from the + plate toward the − plate. Unlike a point charge’s, a large plate’s field does not weaken with distance: its field lines never spread apart. A volt per meter is a newton per coulomb: $E$ is the force on each coulomb. In this lab the bottom plate is at 0 V and the top one at $+V$, so the field points down, like $g$ (a beam’s plates are driven at $\pm V/2$ instead, which gives the same field). With $y$ measured up, its component is $E_y = -(V_{top} - V_{bottom})/d$, negative when the top plate is +, and the force is $F_y = qE_y$.
Doubling $d$ at the same voltage halves $E$: it is $|\Delta V|/d$, never $|\Delta V|\,d$.
Potential, potential energy and their signs
The potential $V$ rises steadily across the gap, from the − plate to the + plate, and is the same all along any line parallel to the plates: those lines are equipotentials. Carry a charge $q$ (with its sign) from one point to another, $\Delta V = V_{final} - V_{initial}$, and its potential energy changes by
$\Delta U = q\Delta V$ $W_{field} = -q\Delta V$ $\Delta K = -q\Delta V$
while the field does the opposite amount of work; if the field is the only force doing work, that work is the change in kinetic energy. Moving along an equipotential costs nothing: the force points across the gap, at right angles to the move. With the bottom plate at 0 V, a positive charge has $U = qEy$, just like $mgy$.
Watch the signs: $\Delta V$ belongs to the place, $\Delta U$ to the charge in it. An electron moving toward the + plate loses potential energy, because $q = -e$.
| charge | moves toward | $\Delta V$ | $\Delta U$ | $W_{field}$ | $\Delta K$ |
|---|---|---|---|---|---|
| + | the + plate | + | + | − | − |
| + | the − plate | − | − | + | + |
| − | the + plate | + | − | + | + |
| − | the − plate | − | + | − | − |
Predict first: let a proton and an electron go from rest mid-gap. Which row does each follow, and why?
Work by any route
The field’s work depends only on where a charge starts and ends, not on the route between. Along a winding route, every bit of sideways travel costs nothing, and every bit across the gap is paid for: up and back cancel. Only the net change in height across the gap counts, as for gravity, and that is what makes potential energy worth defining.
The electronvolt, speed and turning around
Let go from rest, a charge moves the way it is pushed and gains the potential energy it loses: $K = -q\Delta V$, positive for a proton moving to lower $V$ or an electron to higher $V$. A gun’s voltage $V_{acc}$ is a size and gives $K = |q|V_{acc}$. In electronvolts (the energy one $e$ gains across 1 V) that is the charge in $e$ times the volts: an alpha particle (+2 e) across 50 V gains 100 eV. In joules, 1 eV = 1.602 × 10⁻¹⁹ J. Where $U$ is zero is a choice (the − plate, the + plate, the midplane): moving the zero shifts every $U$, but never $\Delta U$ or $K$.
The speed follows from $K = \tfrac12mv^2$:
$v = \sqrt{2K/m}$ $v_0 = \sqrt{2|q|V_{acc}/m}$
Equal charges gain equal energy, but an electron then moves $\sqrt{m_p/m_e} \approx 43$ times as fast as a proton. Launched against the field with $K_0$, a charge slows steadily, stops where it has climbed $K_0/|q|$ volts, at
$s = K_0/(|q|E)$
and comes back with its launch speed. A stopping voltage works this way (Photoelectric Effect).
Fired through the gap
A charge entering parallel to the plates at $v_0$ feels a constant force across the gap and none along it: projectile motion, with $qE_y/m$ in place of $-g$. Its speed along the plates never changes, and its path is a parabola that leaves, at $y$ measured up from its line,
$y = \frac{qE_yL^2}{2mv_0^2}$
at the end of plates of length $L$, after a time $L/v_0$. It leaves at $\tan\theta = qE_yL/(mv_0^2)$, on a straight line that points back to the plates’ center, so a screen a distance $D$ from that center shows $Y = D\tan\theta$. An electron bends toward the + plate, a proton toward the − plate. It is no circle: that would need a force that turns with the velocity.
A drop held still
A charged oil drop between horizontal plates can hang still when the electric force balances its weight: $|q|E = mg$ with $E = V/d$ ($V$ the voltage between the plates), so
$|q| = mgd/V$
Every drop ever measured carries a whole number of electron charges, $e$ = 1.602 × 10⁻¹⁹ C. That is Millikan’s discovery: charge comes in lumps. (Buoyancy, about 0.13 % of the weight, is left out here.)
Part 2 · Going further
Why the field is uniform
In the empty gap the potential obeys Laplace’s equation, $\nabla^2 V = 0$. Between large plates nothing changes along them, so $d^2V/dy^2 = 0$: $V$ is linear in $y$, and $E$ is uniform. The field ends on surface charge, $\sigma = \varepsilon_0 E$ on each plate’s inner face. One sheet alone makes $\sigma/2\varepsilon_0$ on both sides of itself; between two oppositely charged sheets the fields add to $\sigma/\varepsilon_0$, and outside they cancel (Flux Counter derives a sheet’s field with Gauss’s law).
Fringe fields, the loop rule and the edges
Real plates have ends, and there the field must spill out. Take a rectangle with one side across the gap and the opposite side outside, past the plates’ end. A field that was uniform inside and zero outside would give $\oint\vec{E}\cdot d\vec{l} = E\ell$ around it, but every electrostatic field has $\oint\vec{E}\cdot d\vec{l} = 0$ (E. M. Purcell’s argument). So the field fringes. The field engine solves for finite plates, in 2-D (thin plates, endless into the page): for plates as long as their gap the center field is only 96.7 % of $V/d$, and for plates twice as long, 99.86 %.
Along the midplane the fringe adds up: by Gauss’s law $-\int E_y\,dx = Q′/\varepsilon_0$ (the field points down), with $Q′$ the top plate’s charge per unit length, which is more than $E_0L$. These 2-D plates five gaps long act as if they were 6.49 gaps long, so a beam is deflected more than the ideal formula says. The ideal model’s sharp-ended field is no possible electrostatic field: a beam leaving it off the axis would keep the energy it gained, which the real field takes back. That is a limit of the model, not of energy conservation. At the edges themselves charge crowds and the field next to a thin edge grows like $r^{-1/2}$: sparks start there (air breaks down near 3 MV/m), which is why high-voltage electrodes are rounded (Rogowski profiles) or guarded.
One path for every ion, and relativity
Ions accelerated from rest through one gun have $\tfrac12mv_0^2 = |q|V_{acc}$. Put that into the deflection and $q$ and $m$ cancel, leaving sizes (a positive ion bends toward the − plate, a negative one toward the +):
$|y| = \frac{|V_d|L^2}{4dV_{acc}}$ $|Y| = \frac{LD|V_d|}{2dV_{acc}}$
Every ion from one gun follows one path, so electric deflection alone cannot sort ions accelerated together; J. J. Thomson added a magnetic field, which can (Force on a Moving Charge). Through Part 1’s example plates and gun, a proton, a deuteron and an alpha particle all leave 4.17 mm off the axis.
At high speed the deflection follows the momentum. The exact motion is simple for a constant field across the beam: $p_x$ stays constant while $p_y$ grows as $qE_yt$, and the path is a catenary, $|y| = \frac{W_0}{|q|E}\left[\cosh\frac{|q|EL}{p_0c} - 1\right]$, ($W_0$ the total energy, $p_0$ the momentum). For small deflections that is $|y| \approx |q|EL^2/(2p_0v_0)$, where Newton has $2K$ in place of $pv$, so the beam bends more than Newton predicts, by
$y_{rel}/y_N \approx (1 + K/mc^2)/(1 + K/2mc^2)$
Space charge
Pull electrons off a plate as fast as the gap allows and their own charge fills it, pushing the potential down near the cathode. When the current is limited only by this space charge, the potential across the gap follows Child’s law,
$V = V_{acc}(y/d)^{4/3}$
instead of a straight line, and the current density is capped at $J = \frac{4\varepsilon_0}{9}\sqrt{2|q|/m}\,V_{acc}^{3/2}/d^2$ (C. D. Child, 1911; I. Langmuir, 1913). Ion thrusters run near this limit.
Millikan’s drops, measured properly
Terminal speed. A drop’s weight, less buoyancy, is balanced by Stokes’s drag, $6\pi\eta rv$, almost at once: its relaxation time $m/(6\pi\eta r)$ is about ten microseconds, so it always moves at
$v = \frac{2\Delta\rho g r^2}{9\eta}$
with $\Delta\rho$ the oil’s density less the air’s and $\eta$ the air’s viscosity (1.828 × 10⁻⁵ Pa·s at 23 °C). The speed goes as $r^2$, so timing a fall gives the radius.
Rise and fall. Switch the field on and it pushes the drop up, but the drop rises only if $|q|E$ beats its weight less buoyancy; otherwise it still falls, more slowly, and that is no rise. Rising at $v_r$, the field lifts the weight and pushes against the drag, so $|q|E = 6\pi\eta r(v_f + v_r)$. The fall alone gives $r$; then
$|q| = 6\pi\eta r(v_f + v_r)/(EC)$
Slip. At the micrometer scale air is not a continuum, and the drag is divided by the Cunningham factor $C = 1 + b/(pr)$, with $b$ = 8.20 × 10⁻³ Pa·m. Ignore it and $r$ comes out too big by $\sqrt{C}$ and $q$ too high by $C^{3/2}$. Millikan found it from his own drops, plotting $q^{2/3}$ against $1/(pr)$.
Brownian motion. Air molecules jostle the drop: $D = kTC/(6\pi\eta r)$, and a timing of $t$ scatters by about $\sqrt{2Dt}$ along the fall. Small drops carry few charges, which makes them easy to count, but they wander more.
Finding e. With several charges measured, find the largest charge that every one is close to a whole number of; then $e$, from the line $q = ne$, is close to the average of $q/n$. Millikan’s 1913 value, 1.592 × 10⁻¹⁹ C, was 0.61 % low, mostly because the air viscosity he used was too small.
Reference
Common mistakes
- Writing $E = |\Delta V|\,d$. The field is volts per meter: $E = |\Delta V|/d$.
- Thinking the field is stronger near the plates, or zero in the middle. Between large plates it is the same everywhere.
- Letting $U$ follow $V$ for a negative charge. $\Delta U = q\Delta V$: an electron moving toward the + plate loses potential energy.
- Counting distance along the plates as work: only height across the gap counts.
- Losing a sign: a charge let go gains $K = -q\Delta V$, never negative; a gun gives $|q|V_{acc}$.
- Forgetting the square root in $v = \sqrt{2K/m}$, or using the wrong mass.
- Thinking a wider gap changes the energy gained crossing it. $K = -q\Delta V$, whatever $d$ is.
- Letting a beam’s speed along the plates change: the force is across the gap only.
- Measuring $D$ from the plates’ end: the line after them points back to their center.
- Taking “the field pushes the drop up” for “the drop moves up”. It rises only if $|q|E$ beats its weight.
- Leaving out the slip correction for small drops, or buoyancy when it matters.
Equation sheet
| Part 1 | |
|---|---|
| field | $E = |\Delta V|/d$ (1 V/m = 1 N/C) |
| its component | $E_y = -(V_{top} - V_{bottom})/d$ |
| force | $F_y = qE_y$ |
| energy | $\Delta U = q\Delta V$ |
| field’s work | $W_{field} = -q\Delta V$ |
| field alone | $\Delta K = -q\Delta V$ |
| a gun | $K = |q|V_{acc}$ |
| speed | $v = \sqrt{2K/m}$ |
| turnaround | $s = K_0/(|q|E)$ |
| crossing | $d = \tfrac12at^2$ |
| acceleration | $a = |q|E/m$ |
| deflection | $y = \frac{qE_yL^2}{2mv_0^2}$ |
| held drop | $|q| = mgd/V$ |
| electronvolt | 1 eV = 1.602 × 10⁻¹⁹ J |
| Part 2 | |
|---|---|
| surface charge | $\sigma = \varepsilon_0 E$ |
| one gun | $|y| = \frac{|V_d|L^2}{4dV_{acc}}$ |
| screen | $|Y| = \frac{LD|V_d|}{2dV_{acc}}$ |
| relativity | $y_{rel}/y_N \approx (1 + k)/(1 + k/2)$ |
| $k = K/mc^2$ | |
| Child | $V = V_{acc}(y/d)^{4/3}$ |
| Stokes | $v = \frac{2\Delta\rho g r^2}{9\eta}$ |
| rise and fall | $|q| = 6\pi\eta r(v_f + v_r)/(EC)$ |
| slip | $C = 1 + b/(pr)$ |
| Brownian | $D = kTC/(6\pi\eta r)$ |
| its spread | $\sqrt{2Dt}$ |
$E$ field strength (V/m), $E_y$ its upward component; $\Delta V = V_{final} - V_{initial}$ (V); $V$ the voltage between the plates; $d$ gap (m); $q$ charge, with its sign (C, or $e$); $U$ potential energy; $K$ kinetic energy (J, or eV); $v_0$ entry speed; $L$ plate length; $D$ distance from the plates’ center to the screen; $V_d$ the deflecting voltage, $V_{acc}$ the gun’s (a size); $\sigma$ surface charge (C/m²); $\varepsilon_0$ = 8.854 × 10⁻¹² F/m; $\eta$ air viscosity (Pa·s); $\Delta\rho$ oil less air density; $b$ = 8.20 × 10⁻³ Pa·m; $mc^2$ = 511 keV for an electron.
Further reading
OpenStax, University Physics Volume 2, Chapter 7 (Electric Potential), and College Physics 2e, §19.2 (Electric Potential in a Uniform Electric Field). E. M. Purcell and D. J. Morin, Electricity and Magnetism, 3rd ed. (Cambridge, 2013), for fringe fields; D. J. Griffiths, Introduction to Electrodynamics, 5th ed. (Cambridge, 2023), for space charge. R. A. Millikan, Phys. Rev. 2, 109 (1913), for the oil drops.
Parallel Plates & Uniform Fields v1.3 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org