Nuclear Binding, Fission & Fusion · Guide · glidepathscience.org
GuideNuclear Binding, Fission & Fusion
Contents
This Guide explains the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round. Part 1 prepares the Intro track and Part 2 the Advanced track; each takes about twelve minutes to read. Each section ends with a worked example that is not one of the sim’s own problems.
Part 1 · The essentials
Math you’ll need: algebra, powers of ten and unit conversions.
Nucleons and the strong force
An atom’s nucleus is made of protons and neutrons, together called nucleons. The atomic number $Z$ counts the protons and fixes the element; the neutron number $N$ counts the neutrons; the mass number $A = Z + N$ counts both. A nuclide is written ${}^{A}X$, with $Z$ sometimes written below the $A$: iron-56 has 26 protons and 30 neutrons. Isotopes of one element share $Z$ and differ in $N$.
$A = Z + N$
The protons repel one another, and in a nucleus they are only about 10⁻¹⁵ m (1 fm) apart. What holds them is the strong nuclear force, which attracts protons and neutrons alike and is far stronger than the Coulomb push at 1 fm, but which fades within a few fm. The Coulomb push reaches across the whole nucleus. Neutrons add attraction without adding repulsion, so every nucleus beyond hydrogen-1 contains neutrons, and heavy nuclei contain more neutrons than protons.
Mass defect and binding energy
Weigh a nucleus and weigh its parts separately: the nucleus is always lighter. The difference is the mass defect. Tables give the masses of whole atoms, electrons included, so we compare a nucleus’s atom with $Z$ hydrogen-1 atoms (each a proton and an electron) and $N$ neutrons; the electrons then cancel.
$Δm = Zm(^1\mathrm{H}) + Nm_n − M$
By Einstein’s $E = mc^2$, the missing mass is energy: the binding energy $B = Δm\,c^2$, the energy released when the nucleus formed and the energy needed to take it apart. Nuclear masses are given in atomic mass units, u, and 1 u of mass is 931.494 MeV of energy (1 MeV = 1.602 × 10⁻¹³ J).
$B = Δm\,c^2$, with $c^2$ = 931.494 MeV/u
Bigger nuclei have more binding energy simply because they have more nucleons. To compare how tightly nuclei are bound, divide by the number of nucleons: the binding energy per nucleon, $B/A$.
The binding-energy curve
Plot $B/A$ against $A$ and a single curve appears. It climbs steeply through the light nuclei, with helium-4 standing out as an unusually tight nucleus, levels off near 8.8 MeV for $A$ ≈ 60 (nickel-62, iron-58 and iron-56 are at the top), and falls slowly to about 7.6 MeV for uranium.
The curve says where energy comes from. Any change that ends with the nucleons more tightly bound releases the difference. A heavy nucleus that splits into two middle-mass nuclei moves up the curve: fission. Two light nuclei that join move up its steep side: fusion. Iron sits at the top, so neither splitting nor fusing iron releases energy.
Fission and chain reactions
When uranium-235 absorbs a slow neutron, it becomes uranium-236 with extra energy, wobbles, and splits into two fragments plus two or three neutrons. The energy released, $Q$, comes from the masses before and after:
$Q = (m_{before} − m_{after})c^2$
Most of the energy appears as the kinetic energy of the two fragments, which stop within the fuel and heat it. The neutrons freed can cause further fissions: a chain reaction. The multiplication factor $k$ is the average number of new fissions each fission causes. With $k$ below 1 the chain dies away; at $k$ = 1 it holds steady (a reactor running at constant power is critical); above 1 it grows by a factor $k$ each generation:
$N_g = N_0k^g$
Fusion in the Sun, and energy per kilogram
The Sun turns hydrogen into helium. In the proton–proton chain, four protons become one helium-4 nucleus; two of them turn into neutrons, emitting positrons and neutrinos. Counting the positrons’ annihilation, the net change is four hydrogen-1 atoms into one helium-4 atom, and $Q$ again comes from the masses.
Fusion is hard to start because nuclei are positive and repel. They must come within a few fm for the strong force to act, which takes far more energy than ordinary collisions supply. In the Sun’s core, at about 15 million kelvins, only the fastest protons, helped by quantum tunneling, come close enough, which is why the Sun burns slowly, for billions of years.
Per kilogram, nuclear fuels release about a million times as much energy as chemical ones, because nuclear binding energies are millions of electron-volts while chemical bonds are a few. To compare, divide one reaction’s $Q$ by the mass of its fuel:
energy per kg = $Q/m_{fuel}$
In all of these, no nucleon is destroyed: the count of protons and neutrons is the same before and after. The products are bound more tightly, and their smaller rest energy is the energy released.
Part 2 · Going further
Math you’ll need: algebra with powers and roots; one derivative (minimizing a mass); exponentials.
Atomic masses and Q values
Because tables give atomic masses, the electrons ride along. In fission, fusion and alpha decay $Z$ is conserved, so the electrons on each side match and $Q = (\sum m_{before} − \sum m_{after})c^2$ with atomic masses directly. In β⁻ decay the daughter atom gains the electron the decay made, so they cancel again. In β⁺ decay the daughter has one electron fewer and a positron is made, so two electron masses must be subtracted: $Q = [M_P − M_D − 2m_e]c^2$. In alpha decay momentum shares $Q$: the alpha particle takes $K_α ≈ Q(A − 4)/A$.
$Q = [M_P − M_D − 2m_e]c^2$ (β⁺)
The liquid drop
The strong force is short-ranged, so each nucleon binds only its neighbors, and nuclear density is the same in every nucleus ($R = r_0A^{1/3}$, $r_0$ ≈ 1.2 fm). A nucleus behaves like a drop of liquid, and Weizsäcker’s semi-empirical mass formula (SEMF) builds its binding energy from five terms:
$B = a_VA − a_SA^{2/3} − a_C\frac{Z(Z−1)}{A^{1/3}} − a_A\frac{(A−2Z)^2}{A} ± \frac{a_P}{A^{1/2}}$
The volume term counts neighbors; the surface term removes the binding that surface nucleons miss, and matters most in light nuclei; the Coulomb term counts proton pairs over the radius, and drags the curve down for heavy nuclei; the asymmetry term, from the Pauli principle, penalizes unequal numbers of protons and neutrons; and the pairing term is $+a_P/A^{1/2}$ for even–even nuclei, zero for odd $A$ and $−a_P/A^{1/2}$ for odd–odd ones. This sim fits $a_V$, $a_S$, $a_C$ and $a_A$ to its table (16.21, 19.35, 0.744 and 24.93 MeV) and holds $a_P$ at 12.0 MeV.
The valley of stability
At fixed $A$, the stable isobar is the one with the least mass. Writing $M = Zm(^1\mathrm{H}) + Nm_n − B/c^2$ and setting $∂M/∂Z$ = 0 (leaving out pairing) gives the valley’s floor:
$Z_0 = \frac{(m_n − m_H)c^2 + a_C/A^{1/3} + 4a_A}{2a_C/A^{1/3} + 8a_A/A}$
The fission barrier
Stretch a charged drop at fixed volume: its surface energy rises and its Coulomb energy falls. For small stretches the drop becomes unstable when $E_C > 2E_S$, which defines the fissility $x = (Z^2/A)/(2a_S/a_C)$. Below $x$ = 1 a barrier, about 6 MeV for uranium, holds the nucleus together. A slow neutron captured by uranium-235 brings 6.5 MeV of excitation, because the new neutron pairs; uranium-238’s capture brings only 4.8 MeV, below its barrier, so only fast neutrons split it.
$x = (Z^2/A)/(2a_S/a_C)$
Delayed neutrons and control
A reactor’s neutron generation time is about $Λ$ = 10⁻⁴ s, so with prompt neutrons alone a reactivity $ρ = (k − 1)/k$ would multiply the power by $e$ every $Λ/ρ$. But a fraction $β$ = 0.0065 of uranium-235’s neutrons come seconds later from fission fragments. For $ρ$ well below $β$ the power jumps promptly by $β/(β − ρ)$ and then rises with the stable period
$T ≈ (β − ρ)/(λρ)$
with $λ$ ≈ 0.08 s⁻¹ for one delayed group. Control rods have minutes, not milliseconds; above $ρ = β$ (prompt critical) that protection is lost.
Tunneling and the Gamow peak
Two nuclei touching at $r = r_0(A_1^{1/3} + A_2^{1/3})$ face a Coulomb barrier $U = e^2Z_1Z_2/(4πε_0r)$, with $e^2/4πε_0$ = 1.440 MeV·fm: 0.60 MeV for two protons. The thermal energy $kT$ in the Sun’s core is a few keV. Fusion happens by tunneling, whose probability grows as $e^{−\sqrt{E_G/E}}$ with the Gamow energy $E_G = 2μc^2(παZ_1Z_2)^2$, while the number of nuclei at energy $E$ falls as $e^{−E/kT}$. The product peaks at
$E_0 = (E_G(kT)^2/4)^{1/3}$
and the rate goes as $e^{−3E_0/kT}$. A larger $Z_1Z_2$ pushes the peak far up the tail, so the rate climbs much more steeply with temperature: that is why hotter, heavier stars burn hydrogen by the CNO cycle, whose slowest step is p + ¹⁴N.
Reference
Common mistakes
Part 1
- Saying mass is destroyed: the nucleons are all still there; the products are more tightly bound.
- Confusing $B$ with $B/A$: uranium has the most binding in total, iron and nickel the most per nucleon.
- Thinking any nuclear reaction releases energy: only moves toward the curve’s peak do.
- Reading $k$ as neutrons per fission: it counts the next generation’s fissions.
- Forgetting a neutron: count every particle on each side once.
Part 2
- Forgetting $2m_e$ in β⁺ decay, or adding it where $Z$ is conserved.
- Writing $Z^2$ for $Z(Z − 1)$, or $A$ for $A^{1/3}$, in the Coulomb term.
- Using the prompt period for a reactor: delayed neutrons set it.
- Putting the Gamow peak at $kT$: it lies several $kT$ up.
The equation sheet
| Part 1 | |
|---|---|
| nucleons | $A = Z + N$ |
| mass defect | $Δm = Zm(^1\mathrm{H}) + Nm_n − M$ |
| binding energy | $B = Δm\,c^2$, $c^2$ = 931.494 MeV/u |
| Q value | $Q = (m_{before} − m_{after})c^2$ |
| generations | $N_g = N_0k^g$ |
| per kilogram | energy per kg = $Q/m_{fuel}$ |
| Part 2 | |
|---|---|
| SEMF | $B = a_VA − a_SA^{2/3} − a_C\frac{Z(Z−1)}{A^{1/3}} − a_A\frac{(A−2Z)^2}{A} ± \frac{a_P}{A^{1/2}}$ |
| fissility | $x = (Z^2/A)/(2a_S/a_C)$ |
| reactor period | $ρ = (k − 1)/k$, $T ≈ (β − ρ)/(λρ)$ |
| Coulomb barrier | $U = e^2Z_1Z_2/(4πε_0r)$, $r = r_0(A_1^{1/3} + A_2^{1/3})$ |
| Gamow peak | $E_0 = (E_G(kT)^2/4)^{1/3}$ |
Symbols: $Z$, $N$, $A$ the proton, neutron and mass numbers; $M$ an atomic mass; $m_n$ the neutron’s mass; $Δm$ the mass defect; $B$ the binding energy; $Q$ the energy released; $k$ the multiplication factor; $β$, $λ$ the delayed fraction and decay constant; $ρ$ the reactivity; $E_G$ the Gamow energy; $kT$ the thermal energy.
Sources and further reading
- OpenStax, University Physics Volume 3, Chapter 10, Nuclear Physics (10.1 Properties of Nuclei, 10.2 Nuclear Binding Energy, 10.4 Nuclear Reactions, 10.5 Fission, 10.6 Nuclear Fusion), CC BY-NC-SA 4.0 (openstax.org): the Intro track follows its order.
- K. S. Krane, Introductory Nuclear Physics (Wiley, 1988), for the SEMF, fission and reactor kinetics.
- The Atomic Mass Evaluation (AME2016), as tabulated by NIST (“Atomic Weights and Isotopic Compositions”), for the masses; every one agrees with AME2020 to within about 2 × 10⁻⁶ u.
- This sim’s Field Manual (H) for the model and its limits; Atomic Structure & Isotopes for nuclear notation; Radioactive Decay for half-lives.
Nuclear Binding, Fission & Fusion v1.2 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org