Newton's Laws & Free-Body Diagrams · Guide · glidepathscience.org
GuideNewton's Laws & Free-Body Diagrams
Contents
This Guide explains the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round, in the order a textbook would take them. Part 1 prepares the Intro track and Part 2 the Advanced track; each takes about twenty minutes to read. Each section ends with a worked example that is not one of the sim's own problems.
Part 1 · The essentials
Forces are interactions
Every problem in mechanics starts with the same question: which forces act on the body? Get that list wrong and no amount of careful algebra can rescue the answer.
A force is a push or a pull that one body exerts on another. It always has an agent, the body that exerts it, and a target, the body it acts on. Most forces in this sim are contact forces, such as a floor's push and its friction, a hand's push or a rope's pull, which exist only while the two bodies touch; gravity, the Earth's pull, acts across empty space. The sim labels every force by its type and agent, as in N (floor on crate). If you cannot name the agent, the force does not exist.
A free-body diagram isolates one body and draws every force on it as an arrow from a single dot, and nothing else: no velocities, and none of the forces the body exerts on other things. The forces add as vectors into the net force,
$\Sigma\vec F = \vec F_1 + \vec F_2 + \vec F_3 + \cdots$
The sim draws this sum too, as a hollow arrow, so that it is never mistaken for one more force. The commonest error is to add a force that keeps a moving body moving: the push that "carries on" after the hand lets go, or a "force of motion". Neither has an agent. A moving body needs no force to keep moving; forces change how it moves.
The first force on almost every list is weight, which is easy to confuse with mass.
Mass and weight
In everyday speech mass and weight mean the same thing. In physics they do not, and keeping them apart is the first step to using the second law correctly.
Mass $m$, in kilograms, measures how hard a body is to speed up or slow down: its inertia. It belongs to the body and is the same everywhere. Weight $W$ is a force, the gravitational pull of the planet the body is on, in newtons. Near a planet's surface
$W = mg$
where $g$ is the gravitational field strength: 9.81 N/kg on Earth (the same as 9.81 m/s²), 1.62 N/kg on the Moon and 3.71 N/kg on Mars. Weight points straight down, and the planet is its agent. Two habits cause trouble: giving a weight in kilograms, as a bathroom scale does, and taking weight to be whatever a scale reads. A scale reads the normal force it exerts, which equals $mg$ only when nothing else acts vertically and nothing accelerates vertically.
With the forces listed, what do they do? The answer begins with a body on which they cancel.
The first law: no force is needed to keep moving
Aristotle held that motion needs a cause: stop pushing a cart and it stops. Galileo and Newton saw that the cart stops because friction acts on it, and that without friction it would keep going.
Newton's first law says that a body on which the net force is zero keeps its velocity: at rest it stays at rest, and moving, it keeps moving in a straight line at a constant speed.
$\Sigma\vec F = 0$ ⇔ $\vec v = \mathrm{constant}$
Zero net force does not mean no forces. A puck gliding on ice has its weight and the ice's normal force acting on it; they cancel, and the friction is too small to matter. Constant velocity needs no upkeep, and rest is simply the case $v$ = 0. The belief that everything that moves comes to rest on its own is friction talking, not motion.
To use the laws we need the size of each force, and one of the most common has no formula of its own.
The normal force adjusts
The normal force $N$ is the push a surface gives a body pressed against it, perpendicular (normal) to the surface. A table does not know how heavy a book is: it deforms very slightly and pushes back as hard as it must to keep the book from sinking in. For a body resting on a level surface, with any extra vertical pushes and pulls, the vertical forces must add to zero, which gives
$N = mg + P_{\mathrm{down}} - P_{\mathrm{up}}$
So $N = mg$ only when nothing else acts vertically and the body does not accelerate vertically. Press down on the book and $N$ grows; lift on it and $N$ shrinks; lift with a force equal to its weight and $N$ falls to zero, though the book still touches the table. Nor is the normal force the third-law partner of the weight: the two act on the same body and come from different interactions.
With every force sized, we can ask what an unbalanced set of forces does.
The second law: the net force sets the acceleration
The second law says what unbalanced forces do: the net force on a body equals its mass times its acceleration. It is a vector equation, so it holds separately along each axis:
$\Sigma\vec F = m\vec a$ $\Sigma F_x = ma_x$ $\Sigma F_y = ma_y$
A newton is the force that gives 1 kg an acceleration of 1 m/s², so 1 N = 1 kg·m/s². The net force sets the acceleration, the rate at which the velocity changes, not the velocity itself. A steady push on a frictionless cart gives a steady acceleration, so its speed grows for as long as the push lasts. Reading the law as "force makes velocity" is the root of most mistakes in this topic.
On a floor, the force that most often decides the net force is friction, which behaves differently before and after a body starts to slide.
Static friction: whatever it takes, up to a limit
Push gently on a heavy crate and nothing happens: the floor's friction holds it. Static friction acts along the surface between two bodies that are not sliding over each other. Like the normal force, it takes whatever value keeps the surfaces from sliding, pointing against the way they would slide, up to a ceiling proportional to the normal force:
$f_s \le \mu_s N$
The coefficient of static friction $\mu_s$ depends on the two surfaces; for wood on wood the library's table uses 0.50. With no push along the floor there is no friction at all. Under a small push, friction matches the push exactly. When the push reaches $\mu_s N$, friction can do no more, and the body slips. The trap is to treat $\mu_s N$ as the friction itself: it is only the most there can be, reached at the instant of slipping.
What happens at that moment is the subject of the next section.
Kinetic friction, and the jump at the slip
Once two surfaces slide, friction stops adjusting and takes a fixed size. Kinetic friction opposes the sliding, with
$f_k = \mu_k N$
and for most pairs of surfaces $\mu_k$ is smaller than $\mu_s$. In this model $f_k$ does not depend on how fast the body slides. At the slip, friction falls from $\mu_s N$ to $\mu_k N$ while the push is unchanged, so the net force jumps from zero to $(\mu_s - \mu_k)N$ and the acceleration jumps with it: a crate pushed with a slowly rising force lurches into motion. While it slides, $a = (P - \mu_k N)/m$.
Constant velocity needs zero net force, so the push that keeps a body sliding steadily is exactly $\mu_k N$, at any speed: not a little more, which would speed it up, and not $\mu_s N$, which matters only before it moves.
A net force that changes over time changes the acceleration, and that is easy to misread.
A changing force changes the acceleration
A force graph is not a velocity graph: the net force sets the acceleration, the slope of the velocity graph,
$a = \dfrac{dv}{dt} = \dfrac{\Sigma F}{m}$
When the net force shrinks but still points forward, the body keeps speeding up, only more gently: its velocity graph still rises, with a smaller slope. It slows down only when the net force points backward, and moves at a constant velocity only when the net force is exactly zero. The usual slip is "the push is getting smaller, so the body slows down". What matters is not whether the push is falling, but which way the net force points.
Vertical motion follows the same law, with weight in place of friction.
Tension on a vertical rope
It seems obvious that a rope must out-pull gravity for a load to rise. It need not. A rope pulls along itself, away from the body it is tied to, with a force called the tension $T$; a light rope, whose mass can be neglected, has the same tension all along. For a load on a vertical rope, taking up as positive,
$T - mg = ma$ so $T = m(g + a)$
The sign of $a$, not the direction of motion, decides whether the tension exceeds the weight. While the load speeds up on the way up, $a$ points up and $T > mg$. At constant speed, rising or falling, $a$ = 0 and $T = mg$ exactly. While it slows on the way up, $a$ points down and $T < mg$, though the load still rises. A rope has to beat the weight only to speed a load up, never to keep it rising.
So far every force has lain along one axis. A rope at an angle needs both axes at once.
Pulling at an angle
A rope over your shoulder lifts a sled as well as dragging it. The lift takes part of the load off the snow, and with it part of the friction, but it costs some of the forward pull; which effect wins depends on the angle and on μ. A pull $T$ at an angle α above the horizontal has two components: $T\cos\alpha$ along the floor and $T\sin\alpha$ upward. Each axis gets its own equation. Vertically the body does not accelerate, so the floor carries less than the weight, and kinetic friction is $\mu_k$ times this smaller $N$:
$N = mg - T\sin\alpha$ $a = (T\cos\alpha - \mu_k N)/m$
Two slips are common: leaving $N$ at $mg$, which overstates the friction, and swapping the sine and the cosine. A quick check catches the second: at α = 0 the whole pull lies along the floor (cos 0° = 1). The components replace the pull in the free-body diagram; they are not extra forces.
Every force so far had an agent outside the body. The third law says what happens to that agent.
Third-law pairs
If the horse pulls the cart and the cart pulls back just as hard, how does anything move? Newton's third law says that when body A exerts a force on body B, B exerts a force on A that is equal in size and opposite in direction, at the same instant and of the same kind:
$\vec F_{\mathrm{A\,on\,B}} = -\vec F_{\mathrm{B\,on\,A}}$
The two forces of a pair act on different bodies, so they never cancel; forces cancel only in one free-body diagram. The horse moves because the ground pushes its hooves forward harder than the cart pulls it back. Equal and opposite forces on one body, such as a book's weight and the table's push, are never a pair, however well they balance.
Two blocks in contact pushed across a frictionless floor share one acceleration, $a = P/(m_A + m_B)$. The contact force $C$ has one job, to accelerate the block in front, so $C = m_{\mathrm{front}}\,a$. It is not the whole push, and it depends on which block is in front.
That completes the Intro track's ideas. Part 2 returns to them with more care: where they hold, forces that change in an instant, friction as an inequality, and systems that gain mass.
Part 2 · Going further
Inertial frames
The first law can look like a special case of the second, $a$ = 0 when $\Sigma F$ = 0, but it does a job of its own: it says where the second law may be used. A frame of reference is inertial if a body with no net force on it moves at constant velocity as seen from that frame. Newton's laws, with real forces only, hold in inertial frames:
$\Sigma\vec F_{\mathrm{real}} = m\vec a$
In a frame that accelerates relative to an inertial one, force-free bodies seem to accelerate with no agent at all. To use the second law there one must add a fictitious force, $-m\vec a_{\mathrm{frame}}$, which has no agent and no third-law partner; Accelerating Reference Frames takes that route. The mistake to avoid is to treat what a rider in an accelerating frame feels as a real force. Ask for the agent and the partner.
In an inertial frame we can follow forces that change from moment to moment.
Impulse: the area under the force
Many forces last only an instant and change wildly while they act: a bat on a ball, feet on the floor in a jump. Integrating $\Sigma F = m\,dv/dt$ over time gives the impulse–momentum theorem: the net impulse $J$, the area under the net force against time, equals the change in momentum, so
$\Delta v = (1/m)\int \Sigma F\,dt$ $J = \int \Sigma F\,dt = \Delta p$
Only the net force counts. On a force plate, the plate's push $N(t)$ is not the net force, because the weight acts the whole time. The jumper's net impulse is the area between $N(t)$ and the weight line $mg$, counted negative where $N$ dips below $mg$ as the jumper starts to sink. Dividing the plate's whole area by the mass overstates the takeoff speed. For a force that rises and falls as a triangle, the area is half the peak times the duration.
Friction, too, is best treated as more than a formula.
Friction is an inequality
Said precisely, static friction is not a force law at all but an inequality, and the slip is an event to solve for. At rest, the friction a body needs must satisfy $|f_s| \le \mu_s N$. For a pull $P$ at angle α, the friction needed is $P\cos\alpha$ and the normal force is $mg - P\sin\alpha$, so the body holds while $P\cos\alpha \le \mu_s(mg - P\sin\alpha)$. For a pull that grows steadily, $P = kt$, the slip comes when equality is reached:
$t = \mu_s mg/[k(\cos\alpha + \mu_s\sin\alpha)]$
Pulling upward lowers $N$, and with it the ceiling, but leaves less of the pull along the floor; the slip pull is smaller than a level one only while $\cos\alpha + \mu_s\sin\alpha > 1$, below α = 2 tan⁻¹ $\mu_s$. At the slip, friction drops to $\mu_k N$, so the acceleration jumps by
$\Delta a = (\mu_s - \mu_k)N/m$
which is $(\mu_s - \mu_k)g$ only when $N = mg$. Real friction does not drop in an instant: it falls over a short slip distance and depends on speed. This model keeps the instant drop.
The gap between $\mu_s$ and $\mu_k$ has another consequence: one push can do two different things.
Hysteresis: one push, two outcomes
Because $\mu_s$ is larger than $\mu_k$, a steady push between the two ceilings,
$\mu_k N < P < \mu_s N$
has two possible outcomes. A body at rest stays at rest, because static friction can match the push; a body already sliding speeds up, because kinetic friction is smaller than the push. The outcome depends on the body's state, its history, and not only on the forces now acting: hysteresis. The sliding body is not pushed along by its momentum, which is not a force; the net force on it points forward. The same gap, together with the springiness of whatever is dragged, drives stick–slip, a surface that sticks, loads up, slips and sticks again many times a second: the squeak of chalk and the squeal of brakes.
The normal force, too, has a limit it cannot pass.
The normal force is a constraint
The normal force, static friction and a rope's tension are constraint forces: each takes whatever value keeps a condition true (no sinking in, no sliding, no stretching), within limits. A floor can push but never pull, so $N \ge 0$. When the equations ask for a negative $N$, the contact ends: the body lifts off and a different problem begins. For a rope at angle α,
$N = mg - T\sin\alpha \ge 0$ lift-off: $T = mg/\sin\alpha$
Lift-off depends only on the vertical forces, so neither $\mu$ nor the horizontal part of the pull enters it. Using the cosine here is the usual slip.
Constraints matter most where several bodies touch.
Contact with friction, and an answer that is a band
Two blocks pushed together across a floor with friction show both faces of the constraint idea. While both slide, they share one acceleration; the second law for the front block alone, with block 1 pushed from behind, block 2 in front and each block's own $\mu_k$, gives
$C = m_2[P + (\mu_2 - \mu_1)m_1 g]/(m_1 + m_2)$
With equal coefficients the friction terms cancel, leaving the frictionless $C = m_2 P/(m_1 + m_2)$; a rougher block in front needs a harder push. At rest the contact force is statically indeterminate: two equations, $\Sigma F$ = 0 for each block, but three unknowns, $C$ and two static frictions that are only bounded. Any $C$ in a band balances both blocks:
$\max(0,\ P - \mu_{s1}m_1 g) \le C \le \min(\mu_{s2}m_2 g,\ P + \mu_{s1}m_1 g)$
Real blocks settle on one value through tiny deformations and the history of how they were set down, which a rigid model leaves out. Half the push, or the whole push, is a guess, not physics.
Pairs of forces also explain why momentum is conserved.
Pairs conserve momentum
The two forces of a pair are equal and opposite and last exactly as long as the interaction, so their impulses are equal and opposite too. Whatever momentum one body gains, the other loses, so while no net outside force acts, the total cannot change. Two bodies that start at rest and push apart move off in opposite directions with
$m_1 v_1 = m_2 v_2$
so their speeds are in inverse proportion to their masses. The heavier body does not push harder, a belief many students keep even for a truck hitting a car: the forces are always equal, and only the accelerations differ. When one partner is the Earth, its acceleration is far too small to notice.
Momentum also handles a case that $\Sigma F = ma$ cannot: mass joining a moving body.
Open systems
Newton stated his second law in terms of momentum; for a body of fixed mass it reduces to $\Sigma F = ma$. When mass joins a moving system, the momentum changes even at constant velocity. Sand that falls straight onto a conveyor belt lands with no horizontal velocity, so to keep the belt at a steady speed $v$ the motor must bring every new grain up to speed:
$F = dp/dt = v\,dm/dt$
although the belt never speeds up. Two answers are tempting and wrong: zero, because the belt does not accelerate, and the weight of the landing sand, which is vertical. The motor's power, $Fv = v^2\,dm/dt$, is twice the rate at which the sand gains kinetic energy, $\tfrac12 v^2\,dm/dt$; the other half becomes heat as each grain skids up to speed.
The last section asks where these laws stop working.
Where the laws bend
Newton's laws are among the most successful ideas in science, which makes it all the more important to know their edges. The friction laws are empirical, summaries of experiments (the Amontons–Coulomb rules): real coefficients depend on speed, on how long the surfaces have touched and on their condition. The third law fails, even in its weak form, for the magnetic forces between two moving charges: they are not equal and opposite in general; momentum is still conserved once the momentum of the electromagnetic field is counted (Force on a Moving Charge). And near the speed of light $c$, relativity takes over, with corrections set by
$\gamma = 1/\sqrt{1 - v^2/c^2}$
None of these limits makes the laws wrong where this sim uses them; each marks where a model ends, and a careful answer states those limits.
Reference
Common mistakes
- A force of motion. A moving body needs no force to keep moving. Every force has an agent.
- Weight in kilograms. Mass is in kilograms; weight is a force, $W = mg$, in newtons.
- N always equal to mg. The normal force adjusts: pushes down add to it, pulls up take from it.
- Force makes velocity. The net force sets the acceleration; a shrinking forward net force still speeds a body up.
- Friction is $\mu_s N$. That is the ceiling. At rest, friction matches the push; sliding, it is $\mu_k N$.
- A rope must beat the weight to lift. Only to speed the load up. At constant speed $T = mg$.
- Sine and cosine swapped. At α = 0 the whole pull lies along the floor.
- A pair on one body. The two forces of a pair act on different bodies, so they never cancel.
- The plate's whole area. The takeoff speed comes from the area between the plate force and the weight.
- One contact force at rest. With friction and no motion, the contact force is a band, not a value.
Equation sheet
| Part 1 | |
|---|---|
| second law | $\Sigma F = ma$, on each axis separately |
| weight | $W = mg$ |
| normal force | $N = mg$ + (pushes down) − (pulls up) |
| static friction | at rest: $f_s \le \mu_s N$ (it matches the push) |
| kinetic friction | sliding: $f_k = \mu_k N$; $a = (P - \mu_k N)/m$; steady: $P = \mu_k N$ |
| vertical rope | $T - mg = ma$ (up +) |
| angled pull | $N = mg - T\sin\alpha$, $a = (T\cos\alpha - \mu_k N)/m$ |
| third law | F(A on B) = −F(B on A), on different bodies; $C = m_{\mathrm{front}}\,a$ |
| Part 2 | |
|---|---|
| impulse | $\Delta v = (1/m)\int \Sigma F\,dt$ (impulse = area) |
| slip under $P = kt$ | $t = \mu_s mg/[k(\cos\alpha + \mu_s\sin\alpha)]$ |
| the jump | $\Delta a = (\mu_s - \mu_k)N/m$ |
| hysteresis | $\mu_k N < P < \mu_s N$: holds at rest, speeds up sliding |
| lift-off | $T = mg/\sin\alpha$ |
| contact | $C = m_2[P + (\mu_2 - \mu_1)m_1 g]/(m_1 + m_2)$ |
| skaters | $m_1 v_1 = m_2 v_2$ |
| open system | $F = dp/dt$; sand landing at rest on a belt at speed $v$: $v\,dm/dt$ |
Symbols: $m$ mass (kg) · $g$ = 9.81 N/kg on Earth · $W$ weight · $N$ normal force · $P$ a push · $T$ a rope's tension · $f_s$, $f_k$ static and kinetic friction · $\mu_s$, $\mu_k$ their coefficients · α a pull's angle above the horizontal · $k$ a pull's growth rate (N/s) · $C$ contact force · $J$ impulse · $p$ momentum. Forces in newtons (1 N = 1 kg·m/s²).
Further reading
OpenStax, University Physics Volume 1, chapters 5 and 6 (Newton's laws of motion and their applications); D. Kleppner and R. Kolenkow, An Introduction to Mechanics, 2nd ed. (2014), for inertial frames and variable-mass systems; N. P. Linthorne, "Analysis of standing vertical jumps using a force platform," Am. J. Phys. 69, 1198 (2001). The Field Manual lists every source.
Newton's Laws & Free-Body Diagrams v1.3 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org