Interference & Diffraction · Guide · glidepathscience.org
GuideInterference & Diffraction
Contents
This Guide explains the ideas and equations behind every Walkthrough step, Concept Challenge question and Predict round, in the order a textbook takes them. Part 1 prepares the Intro track and Part 2 the Advanced track; each takes about a quarter of an hour to read.
Part 1 · The essentials
Math you’ll need: algebra, the sines and tangents of small angles, and adding two waves by their phase; no calculus.
Light adds as waves do
Drop two stones into a still pond at the same moment and two sets of circular ripples spread out and cross. Where a crest from one stone arrives together with a crest from the other, the water rises twice as high; where a crest arrives with a trough, the two cancel and the water hardly moves. Lines of still water fan out between the stones. This adding of waves, point by point, is called superposition, and the pattern it makes is interference.
Light does the same thing, and that is the strongest evidence that light is a wave. Two beams of light can add to darkness. A particle picture cannot explain that: two streams of pellets never cancel each other. The only catch is scale. A wavelength of visible light is under a micrometer, so the pattern is fine and needs two sources that stay exactly in step. One laser beam, split by two narrow slits, provides both.
Everything in this Guide comes from one rule: add the waves’ amplitudes, then square the total to get the intensity. The sim draws the pond picture with its wavelength stretched thousands of times, so the crests and the still lines can be seen.
Two slits: path difference and fringes
Thomas Young’s experiment, around 1801, is the clearest case. Light of one wavelength $λ$ falls on two narrow slits a distance $d$ apart, and a screen stands a distance $L$ beyond them. Each slit sends out its own wave, and the two start in step. What decides the light at a point P on the screen is the path difference $Δr$, how much farther P is from one slit than from the other. If $Δr$ is a whole number of wavelengths, the waves arrive in step and the point is bright; if it is a whole number plus a half, a crest meets a trough and the point is dark:
$Δr = mλ$ (bright) $Δr = (m + ½)λ$ (dark)
Here $m$ is a whole number, the order of the fringe. A path difference of 1.5 wavelengths is dark, not bright: “more than one wavelength” is not the test, being in step is. When the screen is far away, the two paths to a point at angle $θ$ are almost parallel, and the extra distance is $d\sin θ$. The bright fringes are then at
$d\sin θ = mλ$
For small angles $\sin θ ≈ \tan θ ≈ θ$, and a point at height $y$ on the screen has $\tan θ = y/L$. The $m$th bright fringe sits at $y_m = mλL/d$, and neighboring fringes are evenly spaced:
$Δy = λL/d$
The fringes spread when the wavelength or the distance grows, and crowd together when the slits move apart. Read backward, the same equation makes the fringes a ruler for light. Measure the spacing with a meter stick and $λ = Δy\,d/L$; measuring across ten spacings rather than one divides the ruler’s error by ten. Count spacings, not fringes: from the fifth fringe on one side to the fifth on the other is ten spacings.
Where does the light go? At the center the two waves arrive in step, so their amplitudes add, $E + E = 2E$, and the intensity, which goes as the amplitude squared, is $(2E)^2 = 4E^2$: four times one slit’s. At the dark fringes it is zero. Averaged across the screen, two slits deliver twice the light of one. Interference moves energy from the dark fringes to the bright ones; it never makes or destroys any.
Two slits make sharp lines only in the right places. With more slits the same rule sharpens them further.
Many slits
Add a third slit, a fourth, a sixth, all with the same spacing $d$. At the angles where $d\sin θ = mλ$, every neighbor is a whole wavelength ahead of the last, so all of them arrive in step: the principal maxima stay exactly where two slits put them. What changes is their brightness and width. With $N$ slits in step the amplitude is $N$ times one slit’s and the intensity $N^2$ times. Just away from those angles, the $N$ waves quickly fall out of step with one another, so each bright fringe narrows, roughly as $1/N$. Between neighboring principal maxima there are $N - 1$ dark points and $N - 2$ faint secondary maxima.
A common mistake is to expect the fringes to move closer together, or to multiply, because there are more slits. They do neither: the spacing $d$ sets where they are, and the number of slits sets how sharp and bright.
Push $N$ into the thousands and the result is a diffraction grating, the subject of a later section. First, a different way to get two waves from one: reflection.
Thin films and the flip rule
The colors of a soap bubble and of an oil slick on a wet road are interference too. A thin, transparent film reflects light twice: once at its top surface and once at its bottom. The two reflected waves leave together and interfere. The one from the bottom has traveled an extra distance $2t$ inside the film, and since the wavelength inside a material of index $n$ is shorter,
$λ_n = λ/n$
that extra path counts as $2nt$ in vacuum wavelengths. One more fact decides everything: a reflection off a higher index flips the wave by half a wavelength, and a reflection off a lower index does not. Light going from air into soap reflects with a flip; light going from soap back into air reflects without one. Not every reflection flips, and none flips automatically; count them surface by surface.
With one flip, the two reflections already start half a wave apart, so
bright: $2nt = (m + ½)λ$ dark: $2nt = mλ$
With two flips, or none, the flips cancel and the conditions swap:
bright: $2nt = mλ$ dark: $2nt = (m + ½)λ$
A soap film in air has one flip, at its front. As it drains and thins far below a wavelength, $2nt$ goes to zero and the one-flip rule says dark: the top of a draining film turns black just before it pops. A camera lens coated with magnesium fluoride has two flips (air to MgF₂, and MgF₂ to glass, both to a higher index), so the thinnest coating that best cuts the reflection of wavelength $λ$ is a quarter wave inside it, $t = λ/(4n)$. On ordinary glass that leaves about 1.3 %, not zero: full cancellation needs equally strong reflections, an index of $\sqrt{n_\mathrm{glass}}$ ≈ 1.23. Nor can it cut every color: a coating for green leaves a little red and blue, so coated lenses look purple.
Films interfere two waves from one beam. A single slit, it turns out, interferes infinitely many.
One slit spreads light
Squeeze a laser beam through a single narrow slit and it does not make a narrow stripe on the screen. It spreads into a broad central band with fainter bands on each side, and the narrower the slit, the wider the spread. That is diffraction, and it follows from Huygens’s principle: every point across the slit is a source of new waves, and the screen adds them all.
Divide the slit of width $a$ into two halves. Pair each point in the top half with the point $a/2$ below it. At an angle where those two paths differ by half a wavelength, every pair cancels and the screen is dark. That happens when the whole slit’s edges differ by one wavelength, and more generally the dark fringes are at
$a\sin θ = mλ$, with $m = ±1, ±2, …$
The center, $m = 0$, is bright, not dark: every part of the slit arrives in step there. For small angles the first dark fringes sit at $y = ±λL/a$, so the central band is
$w = 2λL/a$
wide, twice the width of each side band. Ray thinking says a narrower slit makes a narrower beam; wave optics says the opposite, and wave optics is right. A frequent slip is to quote the half-width $λL/a$ as the band’s width.
Real double slits have width too, so the two ideas meet.
Fringes inside an envelope, and missing orders
Each slit of a real double slit has a width $a$, so each spreads its light by the single-slit rule. The two-slit fringes therefore cannot be equally bright everywhere: they sit inside one slit’s pattern, which acts as an envelope. The intensity is the two-slit fringe term multiplied by the one-slit envelope. Where the envelope is zero, no light arrives from either slit, so no fringe can appear there.
That makes some orders vanish. The fringes are at $d\sin θ = mλ$ and the envelope’s first zeros at $a\sin θ = λ$. If $d$ is a whole number of times $a$, say $d = 5a$, the fifth order falls exactly on the envelope’s first zero and is missing, not merely dim. The bright fringes inside the central maximum then run from $m = -4$ to $4$: nine of them. Mistaking a missing order for an ordinary dark fringe, or counting the missing ones, are the usual errors.
Many slits, each with its own envelope, make the most useful optical instrument of all.
Gratings and white light
A diffraction grating is a slide ruled with thousands of evenly spaced lines, commonly quoted as lines per millimeter. Its spacing is $d$ = 1/(lines per meter): 600 lines/mm is $d$ = 1.667 µm. It obeys the same equation as two slits, $d\sin θ = mλ$, but with so many lines each order is a sharp, bright spot with almost nothing between. Because $d$ is only a few wavelengths, the angles are large, so the small-angle shortcut fails; solve for $θ$ with the inverse sine. An order exists only where $\sin θ = mλ/d ≤ 1$, so a grating sends out only a few orders.
In white light every wavelength makes its own spots. The zeroth order, straight through, keeps every color together and is white. In every other order the angle grows with the wavelength, so the light spreads into a spectrum with red farthest out. That is the opposite of a prism, which bends violet most because glass slows violet light most; a grating bends by path difference, and the longest wavelength needs the largest angle. In the higher orders the spectra overlap: with 600 lines/mm, second-order red (sin θ = 0.84) lands beyond third-order violet (0.72).
Diffraction spreads light from every aperture, round ones included, and that sets a hard limit on what any instrument can see.
The Rayleigh limit on detail
A lens, a pupil or a telescope mirror is a round aperture of diameter $D$, and it diffracts like a slit. The image of a single star is therefore never a point: it is a bright disk circled by faint rings, the Airy pattern. Its first dark ring is at
$θ = 1.22λ/D$
from the center; the 1.22 comes from the first zero of a Bessel function, the round-aperture version of the slit’s $a\sin θ = λ$, and about 84 % of the light falls inside that ring. Two points much closer than their blur merge into one. Lord Rayleigh proposed a working rule: two points are just resolved when one’s central peak falls on the other’s first dark ring,
$θ_R = 1.22λ/D$
For two equal, incoherent points through an unobstructed round aperture, the summed image then dips 26.5 % between its peaks (an obstruction, a square aperture or seeing changes that). Two peaks persist slightly closer, so two maxima are not the criterion, which is itself a convention, not an absolute limit. A wider aperture or a shorter wavelength resolves finer; two points $s$ apart at a distance $L$ are at the limit when $s = Lθ_R$. Magnification does not help: it enlarges the blur along with the image.
Part 2 · Going further
Math you’ll need: phasors (adding many waves as arrows) and longer formulas; no calculus.
Phasors and the N-slit pattern
Adding waves by drawing crests gets clumsy beyond two. A phasor makes it routine: represent each wave arriving at a point as an arrow whose length is its amplitude and whose angle is its phase. Adding waves is adding arrows, head to tail; the resultant’s length squared is the intensity. Two slits $d$ apart, seen at angle $θ$, differ in phase by
$φ = 2πd\sin θ/λ$
Two equal arrows $φ$ apart sum to an arrow of length $2E\cos(φ/2)$, so
$I = I_0\cos^2(φ/2)$
with $I_0$ the central maximum. At a dark fringe ($φ = π$) the two arrows point opposite ways and cancel. Leaving out the half, or the square, are the usual slips.
With $N$ equal slits the arrows form an open chain, each turned $φ$ from the last. It closes into a polygon, a zero, when $Nφ$ is a whole multiple of $2π$ but $φ$ itself is not. Summing the chain gives
$I = I_1\sin^2(Nφ/2)/\sin^2(φ/2)$
with $I_1$ one slit’s intensity. At $φ = 2πm$ every arrow lines up and $I = N^2I_1$. The first zero beside a principal maximum comes at $Nφ = 2π$, that is at
$\sin θ = λ/(Nd)$
a fraction $1/N$ of the way to the next order: the peaks narrow as $1/N$. Using $N - 1$ for $N$, or two slits’ zero, are common slips.
Films at an angle, wedges and rings
Look at a film obliquely and its color changes. Inside the film the light travels at an angle $θ_t$, given by Snell’s law, and the path difference between the two reflections becomes $2nt\cos θ_t$. With one flip,
$2nt\cos θ_t = (m + ½)λ$
Since $\cos θ_t$ is less than 1, each condition picks a shorter wavelength: tilt a soap bubble and its colors slide toward blue. Using the outside angle’s cosine in place of the inside one is the usual mistake. Near an interface’s Brewster angle, $\tan θ_B = n$ (53.1° for soap), p-polarized reflection is suppressed; toward grazing it rises again (23.9 % at 80° for air to 1.33), and a film combines both interfaces’ reflections (the Polarization Lab).
A film whose thickness changes steadily makes fringes along it. Two flat glass plates touching at one edge and held apart by a thin spacer of thickness $h$ at distance $L$ form an air wedge. Only the lower plate’s reflection flips, so the contact line is dark, and each dark fringe beyond it adds half a wavelength of gap. The fringes are evenly spaced,
$Δx = λL/(2h)$
so measuring their spacing measures the spacer to a fraction of a wavelength. Bend the wedge round into a curved lens resting on a flat and the fringes become circles, Newton’s rings: the gap at radius $r$ under a lens of radius of curvature $R$ is $r^2/(2R)$, and the $m$th dark ring is at $r = \sqrt{mλR}$.
The two-beam rule places every bright and dark film exactly but slightly misjudges the heights, because light also bounces back and forth inside the film. For one layer with constant indices, adding every reflection (the sim’s transfer matrix) moves no maximum, at any angle or polarization, if the two-beam sum uses the same angle; it still leaves out $1 - r_1^2$ for crossing the top surface twice.
Coherence: when fringes appear at all
Interference needs waves that keep a fixed phase relation, and real light keeps it only so far. Two limits matter. Temporal coherence comes from the light’s spread of wavelengths $Δλ$: two parts of a beam stay in step only over a coherence length of about $λ^2/Δλ$. Sunlight’s coherence length is about a micrometer, so a soap film a few hundred nanometers thick shows colors, while a window pane three millimeters thick shows none; its two reflections are still there, but they no longer interfere.
Spatial coherence comes from the source’s size. Each point of an extended source makes its own fringe pattern, slightly shifted; when the shifts spread across a whole fringe, the patterns wash each other out. For a uniform disk of angular diameter $α$ (the van Cittert–Zernike theorem) the fringe visibility falls as $|2J_1(x)/x|$, $x = πdα/λ$, and first vanishes at a slit spacing
$d_c = 1.22λ/α$
The same 1.22 as the Airy disk appears because the same mathematics describes both. Young placed a pinhole before his two slits to make a small, coherent source; Michelson turned the rule around and measured stars’ sizes by spreading two mirrors until the fringes vanished.
The near field, Fresnel zones and the Arago spot
Every formula so far assumes the screen is far from the aperture. Close up, the waves from different parts of the aperture still travel along visibly different directions, and the pattern is a Fresnel (near-field) pattern instead of the Fraunhofer (far-field) one. One number decides which: the Fresnel number on the whole aperture of width $W$,
$N_F = a^2/(λL)$
written here for a single slit of width $a$ (for two slits use $W = d + a$). When $N_F$ is well below 1 the far-field formulas hold: the sim’s gauge turns green at $N_F ≤ 0.5$, where they agree with the exact pattern within 1.5 %. At $N_F$ near 3 the exact pattern of a slit is a flat-topped shadow with ripples, far from the far-field formula. A lens offers a way round: the screen in its focal plane holds the far field at any size.
On the axis behind a round hole of radius $R$, the near field is dramatic. The hole holds $N_F = R^2/(λL)$ Fresnel zones, rings whose waves alternate in phase, and the intensity at the center is $4\sin^2(πN_F/2)$ times the beam’s: four times as bright with one zone, dark with two. Behind an opaque disk, every point of its rim is the same distance from the center of the shadow, so their waves arrive in step and the center of the shadow is as bright as if the disk were not there. Fresnel’s wave theory predicted this spot in 1818; Poisson thought it absurd, and Arago looked and saw it.
Weighing an order
Part 1 said the double-slit fringes sit inside one slit’s envelope. Written out, for slits of width $a$ and spacing $d$,
$I = I_0\cos^2α\,(\sin β/β)^2$, with $α = πd\sin θ/λ$ and $β = πa\sin θ/λ$
The $\cos^2α$ factor is the two-slit fringes; $(\sin β/β)^2$ is one slit’s envelope, which weighs each order. At the angle of order $m$, $\cos^2α$ = 1 and $β = mπa/d$, so the order’s height is $\mathrm{sinc}^2(mπa/d)$ of the center’s, whatever the wavelength. Two subtleties follow. The envelope slopes, so each fringe’s true peak sits slightly inward of the order’s angle, where the envelope is higher; the dark fringes do not move, which is why a careful measurement fits them. And changing $a$ reweights the orders without moving them, while changing $d$ or $λ$ moves them.
Exact angles and resolving power
A grating’s orders leave at large angles, and on a flat screen a distance $L$ away the $m$th order lands at
$y = L\tan θ$
with $\sin θ = mλ/d$. The small-angle position $mλL/d$ falls more than 5 % short once $θ$ passes about 18°, and $Lθ$ is an arc on a curved screen, not a flat one. The grating equation itself holds exactly at any angle: it gives the direction each order leaves in. Those directions become separate spots only past $L ≈ W/\tan θ_1$ for a beam of width $W$; nearer, the orders overlap into near-field self-images (the Talbot effect), and a spot’s shape needs the far field or a lens.
A grating’s great use is separating close wavelengths. Two lines are just resolved when one’s peak falls on the other’s first zero, and since the zero is $1/N$ of an order away, the resolving power is
$λ/Δλ = mN$
where $N$ is the number of lines the beam lights. More lines, or a higher order, resolve finer; the line spacing sets the angles, not the resolving power. Dividing rather than multiplying by the order is the usual slip.
Cameras, microscopes, telescopes and the eye
Every optical instrument meets the Airy pattern. In a camera, a lens of focal length $f$ and aperture $D$ has f-number $N = f/D$, and the Airy pattern’s first dark ring, at angle $1.22λ/D$, lands a distance
$r = 1.22λN$
from the center on the sensor. Stop a lens down far enough and its Airy disk spans several pixels: the picture softens however good the lens, and it is called diffraction limited. The diameter, $2.44λN$, is sometimes quoted in its place; keep the two apart.
A microscope objective is described by its numerical aperture, NA = $n\sin u$, with $u$ the half-angle of the cone of light it accepts. By Rayleigh’s criterion it resolves two points
$s = 0.61λ/\mathrm{NA}$
apart; Abbe’s criterion, $λ/(2\mathrm{NA})$, is a different rule for a different situation. Oil immersion raises NA up to about 1.4, so ordinary light microscopes stop near 200 nm; super-resolution methods go finer by leaving this model’s assumptions. Magnifying past about 1,000 times the NA shows nothing new: empty magnification.
A telescope on the ground meets a second blur, the atmosphere’s turbulence, called seeing. On a good night it smears every star to about 1″ (an arcsecond). A telescope whose Rayleigh limit is finer than the seeing gathers more light but resolves no finer; only adaptive optics, which undoes the blur, or a telescope in space reaches the diffraction limit. The eye, too, is a round aperture: a pupil of a few millimeters has a Rayleigh limit near the 1′ (one arcminute) that defines 20/20 vision.
Reference
Common mistakes
Part 1
- Light can only add. Two waves out of step cancel: add amplitudes, then square.
- Fringes as images of the slits. Every fringe needs both slits; cover one and they all vanish.
- Narrower slit, narrower beam. A narrower slit spreads light wider, as $2λL/a$.
- Every reflection flips, or none does. Only a reflection off a higher index flips by half a wave.
- The film conditions swapped. One flip: bright at $(m + ½)λ$; two flips or none: bright at $mλ$.
- A grating sorts colors like a prism. A grating bends red most; a prism bends violet most.
- The small angle at steep orders. Past about 18°, use $y = L\tan θ$, not $mλL/d$.
- Magnification taken for resolution. Magnifying enlarges the blur too.
Part 2
- A missing order taken for a dark fringe. It falls on the envelope’s zero; dark fringes between orders have another cause.
The equation sheet
| Part 1 | |
|---|---|
| bright, dark | $Δr = mλ$, $Δr = (m + ½)λ$ |
| two slits | $d\sin θ = mλ$; $Δy = λL/d$ |
| one slit, dark | $a\sin θ = mλ$; $w = 2λL/a$ |
| in a medium | $λ_n = λ/n$ |
| one flip | bright $2nt = (m + ½)λ$, dark $2nt = mλ$ |
| two flips or none | bright $2nt = mλ$, dark $2nt = (m + ½)λ$ |
| Rayleigh | $θ_R = 1.22λ/D$; $s = Lθ_R$ |
| Part 2 | |
|---|---|
| two phasors | $I = I_0\cos^2(φ/2)$, $φ = 2πd\sin θ/λ$ |
| N slits | $I = I_1\sin^2(Nφ/2)/\sin^2(φ/2)$; $\sin θ = λ/(Nd)$ |
| gratings | $λ/Δλ = mN$; $y = L\tan θ$ |
| envelope | $I = I_0\cos^2α\,(\sin β/β)^2$, $α = πd\sin θ/λ$, $β = πa\sin θ/λ$ |
| tilted film | $2nt\cos θ_t = (m + ½)λ$ |
| air wedge | $Δx = λL/(2h)$ |
| coherence | $d_c = 1.22λ/α$ |
| near field | $N_F = a^2/(λL)$ |
| instruments | $r = 1.22λN$; $s = 0.61λ/\mathrm{NA}$ |
Symbols: $λ$ the wavelength in vacuum (air is close enough); $d$ the slits’ spacing; $a$ a slit’s width; $D$ an aperture’s diameter; $L$ the screen’s distance (a spacer’s distance for the wedge); $y$ a position on the screen; $θ$ the angle from the straight-through direction; $m$ an order; $n$ an index; $t$ a film’s thickness; $θ_t$ the angle inside it; $N$ the number of slits (or lines lit), or a lens’s f-number in $r = 1.22λN$; $N_F$ the Fresnel number; $α$ a source’s angular size; $h$ the wedge’s spacer; $s$ a separation; NA a numerical aperture.
Sources and further reading
- OpenStax, University Physics Volume 3, chapters 3 (“Interference”) and 4 (“Diffraction”), CC BY-NC-SA 4.0 (openstax.org): the Intro track follows their order of topics.
- E. Hecht, Optics; M. Born and E. Wolf, Principles of Optics.
- This sim’s Field Manual (H) for the model and its limits; the Quantum Eraser Lab (one photon at a time) and the Polarization Lab.
Interference & Diffraction v1.2 · © 2026 Dr. David Meier · CC BY-NC-SA 4.0 · glidepathscience.org